Close



GLASS-FIBER PUTTY


Properties

Polifibro glass-fibre putty is an amine preaccelerated, semiflexible, high reactive unsaturated polyester based putty which contains special glass fibers and high quality fillers. It has very good adhesion, filling and sanding properties. With the addition of benzoyl peroxide (the hardening substance) it readily hardens even at low temperatures (down 5XC) The puty has outstanding storage stability due to the built-in-amine based unsaturated polyester resin and high quality fillers used. This product has a number of uses and is particularly suited to repair bodyworks and to stopper and assemble products in fiber glass.
Density:1.700.05 g/cm3, 20XC
Color:Light gray

Application Surfaces

Polifibro glass-fibre putty can be applied to bare metal including aluminium, galvanized stell, SMC, FRP as well as old painted metal surfaces.

Application

Mixing Ratio:Polifibro glass-fibre polyester putty 100
Hardener:1-3
Gel Time:5 - 10 min, depending on temperature and proportion of hardener
Sanding:20-30 min. 20XC
Sanding Paper:P-150

Packaging

0.515 Kg. - 1 Kg. - 1.85 Kg. -3,060 Kg.
(Net weights in tin cans including hardeners with plastic tubes)

Storage

Polifibro glass-fibre putty should be kept in its original can and in a cool place with the lid securely closed. Under suitable condition it can be stored for one year at temperatures up to 25XC.

Caution

Vapors may cause flash fire. Flammable. Harmful if inhaled. Irritating to eyes and skin. Do not eat, drink or smoke while using this product. Do not breathe the vapors. In case of contact with eyes, rinse immediately with plenty of water and seek medical assistance. If swallowed, do not induce vomiting. Call a physician immediately. Use only in well ventilated areas away from heat and flames. Keep out of reach of children. Do not return unused mixed meterial to can. It should only be used by trained professionals.


Close