Polisilver aluminium polyester putty is an amine preaccelerated, semiflexible, high reactive unsaturated polyester based putty which contains special aluminium metal and high quality fillers. The putty has excellent thixotropic structure and a butter-like workability. In conjunction with benzoyl peroxide as hardener, yt readily hardens even at low temperatures (down to 5XC) Polisilver polyester aluminium putty provides a tack-free surface with aluminium effect.
Density:1.700.05 g/cm3, 20XC

Application Surfaces

Polisilver has a number of uses . It may be used instance in bodyworks where aluminium effect is necessary or soft - soldering. Usinn this product it can also be possible to repair cracks in cylinder blocks or holes and cavities in radiators.


The surface should be clean and free from oil, grease, wax and dirt. It can be used a 80-180 grit disc to remove or scuff paint. Before application, surface must completely be dry.

Mixing Ratio:Polisilver aluminium polyester putty 100
Gel Time:5 - 10 min, depending on temperature and proportion of hardener
Sanding:If necessary, 30 minutes after application


1 Kg. - 1.85 Kg. -3,060 Kg.
(Net weights in tin cans including hardeners with plastic tubes)


Polisilver polyester putty should be kept in its original can and in a cool place with the lid securely closed. Under suitable condition it can be stored for one year at temperatures up to 25XC.


Flammable. Harmful if inhaled. Vapors may cause flash fire. Irritating to eyes and skin. Do not eat, drink or smoke while using this product. Do not breathe the vapors. In case of contact with eyes, rinse immediately with plenty of water and seek medical assistance. If swallowed, do not induce vomiting. Call a physician immediately. Use only in well ventilated areas away from heat and flames. Keep out of reach of children. Do not return unused mixed meterial to can. It should only be used by trained professionals.